MX-M850/M950/M1100 Operation-Manual Maintenance-Guide GB

23
REMOVING MISFEEDS
6
Turn the M8 knob in the direction of the
arrow.
7
Grasp the M9 lever and pull out the unit.
Pull the unit out until it stops.
8
Remove the misfed paper.
9
Open the M10 lever in the direction of
the arrow.
10
Remove the misfed paper.
After removing the paper, return
the M10 lever to its original
position.
11
Open the M11 lever in the direction of
the arrow.
12
Remove the misfed paper.
After removing the paper, return
the M11 lever to its original
position.
13
Replace the unit and close the cover.
Before performing step 7, be sure to turn the M8 knob.
If you perform step 7 without turning the knobs, the
paper may tear and torn pieces may remain in the
machine.