MX-M850/950/1100 Operation-Manual Maintenance-Guide GB

35
REMOVING MISFEEDS
3
Pull the lever up in the direction of the
arrow so that it is horizontal.
4
Pull out the unit.
Keeping the lever horizontal,
gently pull out the unit until it
stops.
After pulling the unit all the way
out, make sure that the lever is
points down slightly. This locks
the unit.
5
Turn the knob in the direction of the
arrow.
6
Remove the misfed paper.
7
Push the paper guide down in the
direction of the arrow.
8
Remove the misfed paper.
When released, the paper guide
automatically returns to its
original position.
9
Pull the paper guide up in the direction
of the arrow.
If the conveyor unit is not locked when you
remove a misfeed, your hand or fingers may
become pinched by the devices.
When removing misfed paper, do not touch or
damage the transfer belt.