1100 Operation-Manual Maintenance-Guide GB

REMOVING MISFEEDS

Remove the misfed original.

After removing the original,

close the cover and then close

the automatic document feeder.

X Transport unit

Open the cover.

Turn the knob in the direction of the

arrow.

After removing the misfeed, open and close the automatic

document feeder (or the document feeding area cover) to

clear the misfeed display from the touch panel.

Caution

Parts of the fusing unit are hot.

Parts that are hot are indicated as shown.

When removing a misfeed, do not touch these parts.

Exercise caution not to burn yourself.

Extreme heat Extreme heat Extreme heat

Be sure to turn the knob before performing step 3. If

you perform step 3 without turning the knob, the paper

may tear and pieces may remain in the machine.