Operation Manual, Setup Guide for the Administrator

26
3.5.5 Z-Fold Position Adjustment
This performs adjustment of fold position for Z-fold.
1) Select [Z-Fold Position Adjustment] in the Folding Unit
screen.
2) Adjust the Z-fold position for when the folding unit is
installed.
The 10-key pad appears when each of the textboxes is
tapped. Enter the desired values.
Input range: [46] to [53] (1 = 0.5 mm)
The default is [50].
Diagram showing the Z-fold position
4 Print Setting Value List
The current setting values and the factory defaults for the
items in the machine adjustment can be printed.
Select [Print Setting Value List] in the Machine Adjustment
screen.
Note: Settings that have been changed from the factory
defaults are marked with an asterisk.
1) Check the items to print.
Default: [Checked] for all
2) To print the selected items, tap the [Print] key.
Note: The [Print] key is greyed out when no item is
checked.