Operation Manual, Setup Guide for the Administrator

19
2.4 Off-Centre Adjustment
Select [Off-Centre Adjustment] in the Image
Position/Ratio/Area Adjustment screen.
2.4.1 Print Off-Centre Adjustment
This performs centre position adjustment for printing.
1) Select [Print Off-Centre Adjustment] in the Off-Centre
Adjustment screen.
2) Enter the desired values and tap the [Register] key.
Example of the Print Off-Centre Adjustment screen
Input range: [30] to [70] (1 = 0.1 mm)
Default: [50] for each
Note:
・ LCT Tray 1, LCT Tray 2, LCT Tray 3, LCT Tray 4,
LCT Bypass Tray and LCC are displayed only when
the options are installed.
・ To return your preferences to the factory defaults,
tap the [Return to the Defaults] key. When a
confirmation message appears, tap the [OK] key.
You r preferences are returned to the factory defaults
and the screen returns to the Off-Centre Adjustment
screen.
2.4.2 Scan Original Off-Centre Adjustment
This performs centre position adjustment for scanning
original.
1) Select [Scan Original Off-Centre Adjustment] in the
Off-Centre Adjustment screen.
Specify the Print Position Adjustment first.
2) Enter the desired values and tap the [Register] key.
Input range: [20] to [80] (1 = 0.1 mm)
Default: [50] for each
Note:
To return your preferences to the factory defaults, tap
the [Return to the Defaults] key. When a confirmation
message appears, tap the [OK] key. Your preferences
are returned to the factory defaults and the screen
returns to the Off-Centre Adjustment screen.
2.4.3 Auto Centring Adjustment
This makes settings of condition for automatic centring
adjustment (function to detect paper position and perform
centring adjustment automatically).
1) Select [Auto Centring Adjustment] in the Off-Centre
Adjustment screen.
2) Select [ON] or [OFF] for each scan direction adjustment
and tap the [Register] key.
Main Scan Direction Adjustment:
Select [ON] or [OFF]. Default: [ON]
Sub Scan Direction Adjustment:
Select [ON] or [OFF]. Default: [ON]
Main Scan Direction Real Time Adjust:
Select [ON] or [OFF]. Default: [OFF]
Caution:
Turning the Main Scan Direction Real Time Adjustment
ON might affect the print speed and the drum life.