Brochure

10
Base Unit
MX-KB13 Keyboard
1. MX-MFX1 Multi Bypass Tray
A5R – A3W, 100 sheets (80g/m
2
)
(for main machine).
2. MX-LC12 Large Capacity Tray (A4)
A4 – B5, 3,500 sheets (80g/m
2
)
Requires MX-MFX1.
3. MX-LCX3 N Large Capacity Tray (A3)
A3 – A4R, 3,000 sheets (80g/m
2
)
Requires MX-MFX1.
Not available for MX-M1204 & MX-M1054.
MX-RB16 Paper Pass Unit
Required with MX-LC13.
4. MX-LC13 Large Capacity Tray (2 drawers)
SRA3 – A4R, 2,500 sheets each (80g/m
2
)
MX-RB17 Connection Module
Required if 2 x MX-LC13 are installed.
5. MX-MF11 Multi Bypass Tray
(for MX-LC13)
SRA3 – A5R, 500 sheets (80g/m
2
)
6. MX-SL10 Status Indicator
Finishing
7. MX-FN24 Finisher (3k - 50-sheet staple)
A3-B5R (offset/staple), A3W – A5R (non offset)
Offset tray: 3,000 sheets*
Top tray: 250 sheets*
50-sheet* staple capacity
(front, rear or 2 point stitching).
Not available for MX-M1204 & MX-M1054.
8. MX-FN25 Saddle Stitch Finisher
(2k - 50-sheet staple)
A3-B5R (offset/staple), A3W – A5R (non offset)
Offset tray: 2,000 sheets*
Top tray: 250 sheets*
50-sheet* staple capacity
(front, rear or 2 point stitching)
Saddle stitch tray: 10 sets (11-15 sheets),
15 sets (6-10 sheets), 30 sets (2-5 sheets)
Not available for MX-M1204 & MX-M1054.
MX-PNX4A/C/D Punch Module
(for MX-FN24 or MX-FN25)
A: 2 hole punch, C: 4 hole punch, D: 4 hole wide punch.
9. MX-RB18 Curl Correction Unit
Corrects paper curling by putting pressure
on the convex/concave curl
Required if MX-FN21 or MX-FN22 is installed.
10. MX-CF11 Inserter (200-sheet x 2 bin)
SRA3 – A5R, 200 sheets each (80g/m
2
).
11. MX-ST10 High Capacity Stacker
SRA3 - A5R
Paper stacking tray: 5,000 sheets (80g/m
2
)
Top tray: 250 sheets (80g/m
2
).
12. MX-CA10 Paper Cart
Included with MX-ST10.
For easy transport of finished document to another place.
13. MX-GB50A GBC SmartPunch Unit
Paper Size: A4
Paper Weight: 75-216 g/m
2
MX-GBX12 12 Hole VeloBind
MX-GBX20 20 Hole Plastic Comb
MX-GBX21 21 Hole Plastic Comb
MX-GBX23 23 Hole Wire
MX-GBX34 34 Hole Wire
MX-GBX47 47 Hole Color Coil
MX-GBX34PR 34 Hole ProClick
MX-GBX2H65 2 Hole 6.5mm Pin
MX-GBX4H65 4 Hole 6.5mm Pin
MX-GBX2H80 2 Hole 8mm Pin
MX-GBX4H80 4 Hole 8mm Pin
MX-GB54 19 HolePlastic Comb
MX-GB55 34 Hole Wire
MX-GB56 4 Hole 8mm Pin
Requires MX-RB13 and either MX-FN21 or MX-FN22
14. MX-RB13 Relay Unit
15. MX-FD10 Folding Unit
Folding options include Z, C, accordion,
double and half folds.
Keyboard
Inserter
Folding Unit
WireBindCombBind
®
Stacker
Multi Bypass Tray
Finisher
Saddle Stitch Finisher
Options
Color Coil
®
ProClick
®
VeloBind
®
2 hole