C400 Operation-Manual Quick-Guide GB

106

CHANGING THE FILE FORMAT

The file format (file type and compression method) for sending a scanned

image is specified when the destination is stored in a one-touch key;

however, you can change the format at the time of transmission.

The procedure for sending a scanned image in full colour TIFF format is

explained below.

Place the originals.

When using the document glass,

place the original with the side to be

scanned face down.

Select settings. (File type)

(1) Select the [File Format]

key.

Select with and press [OK].

(2) Read the displayed

message and select the

[OK] key.

(3) Select the

[Colour/Greyscale] key.

Select with and press [OK].

The side to be scanned must be face up!

BACK

(2)

(3)

(1)

mxc381_ex_qck.book 106 ページ２００８年１０月１６日　木曜日　午後２時３９分