MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB

35
*1 When a saddle stitch finisher is installed.
*2 When a large capacity tray is installed.
*3 When a saddle stitch finisher or finisher is installed.
*4 When an inserter is installed.
*5 When a punch module is installed.
*6 When a colour-related problem has occurred.
■ Copy Function Settings
● Disabling of Devices 64
X Disabling of Document Feeder Disabled 64
X Disabling of Duplex Disabled 64
X Disabling of Large Capacity Cassette*
2
Disabled 64
X Disabling of Tray Setting Disabled 64
X Disabling of Finisher*
3
Disabled 64
X Disabling of Inserter*
4
Disabled 64
X Disabling of Offset Disabled 64
X Disabling of Stapler*
3
Disabled 64
X Disabling of Punch*
5
Disabled 64
X Disabling of Colour Mode*
6
Disabled 64
● Fusing Control Settings 60 - 90 g/m
2
(16 - 24 lbs.) 64
Item Factory default setting Page
■ Copy Function Settings
65
● Initial Status Settings
65
X Colour Mode Full Colour
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 66
X Copy Exposure Adjustment
66 Colour 5
 Black & White 5
X Rotation Copy Setting Enabled 66
X Add or Change Extra Preset Ratios – 66
X Setting a Maximum Number of Copies 999 66
Item Factory default setting Page