MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB

34
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
■ Device Control
X Internet Fax*
2
60
 (Same as Scan)
X Fax*
3
 (Same as Scan)
X USB Memory Scan
 Customize 1 –
 Customize 2 –
 Customize 3 –
X Data Entry*
4
 (Same as Scan)
● Home Screen Settings*
1
– 60
● Display Pattern Setting Following the System Settings 60
Item Factory default setting Page
■ Device Control
61
● Other Settings 61
X Original Feeding Mode All Disabled 61
X Saddle Stitch Position Adjust*
1
0.0 mm 61
X Auto Paper Selection Setting Plain Paper 61
X Tandem Connection Setting
61
 IP Address of Slave Machine 0.0.0.0
 Port Number 50001
 Disabling of Master Machine Mode Disabled
 Disabling of Slave Machine Mode Disabled
X Detect Standard in Auto Colour Mode 3 61
X Auto Switching of Finisher Trays Enabled 61
X Registration Adjustment 62
X Optimization of a Hard Disk – 62
X Clear All Job Log Data – 62
● Original Size Detector Setting
63X Original Detection Size Combination AB-1
X Cancel Detection at Document Glass Disabled
Item Factory default setting Page