MX-5500N/6200N/7000N Operation-Manual Quick-Guide GB

11
LOGOUT
Main power
indicator
[CLEAR ALL] key
Press this key to redo an operation
from the beginning.
All settings will be cleared and
operation will return to the initial state.
[STOP] key
Press this key to stop a copy job or scanning of
an original.
Numeric keys
These are used to enter the number of
copies, fax numbers, and other
numbers.
[LOGOUT] key ( )
When user authentication is enabled,
press this key to log out after using the
machine. When using the fax function,
this key can be pressed to send tone
signals on a pulse dial line.
[#/P] key ( )
Press this key to use a job program
when using the copier function. When
using the fax function, press this key to
dial using a program.
[BLACK & WHITE START] key
Use this key to copy or scan an original
in black and white. This key is also used
to send a fax in fax mode.
Use this key to activate power save
mode. The [POWER SAVE] key blinks
when the machine is in power save
mode. This key is also used to
deactivate power save mode.
[COLOUR START] key
Use this key to copy or scan an original in colour.
This indicator lights
when the main power
is switched on.
[POWER SAVE] key
[CLEAR] key
Press this key to return settings such as the
number of copies to "0".
[POWER] key
Use this key to turn the
machine power on and
off.
mx7000_gb_qck.book 11 ページ ２００６年４月１７日 月曜日 午前８時５９分