MX-5500N/6200N/7000N Operation-Manual Copier GB

125
4
Set the number of copies (number of
sets) with the numeric keys.
If you will copy multiple originals using the document glass,
switch to sort mode after this step.
☞ Sort mode (page 38)
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
5
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ).
One set of copies is printed.
If you are using the document glass to copy multiple originals,
change originals and press the [START] key. Repeat until all
pages have been scanned and then touch the [Read-End] key.
One set of copies will be printed. (For the second original and
following originals, use the same [START] key as you did for
the first original.
To cancel copying...
Press the [STOP] key ( ).
6
Check the printed set of copies. If the
copies are acceptable, touch the [End]
key. If you need to change the settings,
touch the [Change] key.
When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.
To cancel copying...
Press the [STOP] key ( ).
7
Plain
A4
Special Modes
2-Sided Copy
or
EndChange
Press [End] to continue.
To make a proof copy again, press
[Start].