MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
54
CHECKING COMPLETED JOBS
You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed broadcast transmission jobs and serial polling jobs, and jobs that used document filing. Touch the key of the
desired job in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name Information displayed
File Information on a transmission/reception that used document filing.
To call up the file and use it, touch the [Call] key.
Failed Shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: Address name or number
Start time: Time at which communication began.
Status: Description of failure (error)
The [Retry] key can be touched to re-attempt transmission to that destination.
All Destinations Shows all addresses specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: Address name or number
Start time: Time at which communication began.
Status: Communication result
The [Retry] key can be touched to transmit to all destinations again.
OK
Retry
Detail of
Broadcast0001
1/1
All DestinationsFailedFile
DDD DDD
EEE EEE
10:01 11/01
NG000000
NG000000
10:10 11/01
Address
Start Time
Status
002
010