MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
49
JOB QUEUE SCREEN AND COMPLETED JOB SCREEN
The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in
progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key
((2) below).
(1) Job queue screen
Jobs are shown as keys in the order they were reserved.
Each key shows information on the job and its current
status.
(2) Job status screen selector key
Touch this key to switch between the job queue screen
and the completed jobs screen.
(3) Job queue screen [Detail] key
The detailed contents of a broadcast transmission or
serial polling job reserved or in progress can be
displayed.
Touch the key of the desired broadcast transmission job
in the job queue screen (1) and then touch this key.
☞ CHECKING A RESERVED JOB OR THE JOB IN
PROGRESS (page 53)
(4) [Priority] key
Touch this key to give priority to a selected job.
☞ GIVING PRIORITY TO A RESERVED FAX JOB
(page 56)
(5) [Stop/Delete] key
Touch this key to stop or delete a selected job.
☞ CANCELLING A FAX IN PROGRESS OR A
RESERVED FAX (page 55)
(6) Mode switch keys
Use these keys to change the job status screen mode.
(7) Completed jobs screen
This shows up to 99 completed transmission or reception
jobs. A description of the job and the result (status) are
shown.
Broadcast transmission jobs, serial polling jobs, and
transmission/reception jobs that used the document filing
function are indicated as keys.
(8) Completed jobs screen [Detail] key
This shows detailed information on the results of
completed broadcast transmission jobs, completed serial
polling jobs, and completed jobs that used the document
filing function.
Touch the key of the desired job in the completed jobs
screen (7) and then touch this key.
From the details screen, it is possible to resend the fax to
destinations to which transmission was not successful.
☞ CHECKING COMPLETED JOBS (page 54)
(9) [Call] key
Touch this key to call up and use a transmission or
reception job stored using the document filing function.
Address Set Time
Status
Job Queue
Complete
Priority
Stop/Delete
Internet Fax
Broadcast0002
AAA AAA
0312345678
Waiting
Waiting
Waiting
Broadcast0001
10:00 11/01 000/003 Connecting
10:05 11/01 000/001
10:08 11/01 000/004
10:30 11/01 000/010
1/1
Address Start Time
Status
Job Queue
Complete
Call
Internet Fax
Broadcast0002
BBB BBB
0323456789
Send OK
Printed
Send OK
Broadcast0001
NG000000
10:05 11/01 050/005
10:00 11/01 990/010
10:08 11/01 001/001
10:30 11/01 001/001
1/1
Pages
Detail
Fax Job
Scan toPrint Job
Pages
Detail
Fax Job
Scan toPrint Job
(7)
(6)
(8)
(2)
(9)
(1)
(6)
(3)
(4)
(2)
(5)
Job queue screen Completed job screen