MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
22
3
Press the [BLACK & WHITE START] key
().
Scanning begins.
4
If you have another page to scan,
change pages and then press the
[BLACK & WHITE START] key ( ).
Repeat until all originals have been scanned.
• The resolution and exposure can be changed for each original that is scanned.
• If no action is taken for one minute, scanning automatically ends and the transmission is reserved.
5
Touch the [Read-End] key.
A beep sounds.
Open the automatic document feeder and remove the original.
• When scanning is completed, "Job stored." will be displayed together with a job control number.
This number can be used to locate the job in the Transaction Report or in the Image Sending Activity Report.
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
To cancel transmission...
Press the [STOP] key ( ) before the [Read-End] key is pressed.
• If a fax is being received when the transmission operation is performed, the transmission will be reserved and transmitted
after fax reception is completed.
• If the memory becomes full while the originals are being scanned, a message will appear and transmission will be
cancelled.
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End]
Read-End