MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
175
Device Control
These settings control devices installed on the machine. Touch the [Device Control] key and configure the settings.
Original Size Detector Setting
One of the five groups of standard original sizes shown
below can be selected for detection by the original size
detection function.
Select one of the keys and touch the [OK] key.
To disable detection of original sizes on the document
glass, select the [Cancel Detection at Document Glass]
checkbox and touch the [OK] key.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible
using the document glass.)
To enable this setting, select the checkbox and
touch the [OK] key.
Original Feeding Mode
The following original feeding modes can be set to
operate by default in image send mode. When a mode is
frequently used, this saves you from having to select the
mode in the special modes each time it is used.
• Mixed Size Original (Different Width)
• Slow Scan Mode
To use this setting, select the checkboxes of the
desired items and touch the [OK] key.
Disabling of Duplex
This is used to disable two-sided printing, such as when
the duplex module malfunctions.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Large Capacity
Cassette
(When a large capacity cassette is installed.)
This setting is used to prohibit the use of the large
capacity cassette, such as when the cassette
malfunctions.
To enable this setting, select the checkbox and
touch the [OK] key.
Selections
Detectable original sizes
Document glass Document feeder tray
(automatic document
feeder)
AB-1 A3, A4, A4R, A5R,
B4, B5, B5R
A3, B4, A4, A4R, B5,
B5R, 8-1/2" x 13",
8-1/2" x 14",
11" x 17"
AB-2 A3, A4, A4R, A5R,
B4, B5, B5R
216 mm x 330 mm
A3, A4, A4R,
A5, B4, B5, B5R,
8-1/2" x 11",
11" x 17",
216 mm x 330 mm
AB-3 A4, A4R, A5, B4,
8K, 16K, 16KR
A3, A4, A4R, A5, B4,
8K, 16K, 16KR,
8-1/2" x 11",
11" x 17",
216 mm x 330 mm
INCH-1 11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2"
11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2", A4,
A3
INCH-2 11" x 17",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2"
11" x 17",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
5-1/2" x 8-1/2", A4,
A3
• If "Cancel Detection at Document Glass" is
selected, all originals placed on the document glass
will be treated as special size originals.
• Inch sizes such as 11" x 17" are generally used in
North America.
System Settings
Original Feeding Mode
Copy
Scan to HDD
Image Send
OK
Slow Scan Mode
Mixed Size Doc.
Same Width
Mixed Size Doc.
Different Width