MX-FXX1 Operation-Manual GB

120
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
Enter the destination fax number.
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
Touch the one-touch key in which the fax number and
F-code of the relay machine are stored.
(3) Touch the [To] key.
☞ CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK (page 36)
If the fax number of the transmitting machine is not stored in a
one-touch key in the Address Book, enter the fax number and
F-code with the numeric keys.
(1) Enter the fax number of the destination.
(2) Touch the [Sub Address] key to enter "/".
(3) Enter the sub-address.
(4) Touch the [Sub Address] key to enter "/".
(5) Enter the passcode.
3
Press the [BLACK & WHITE START] key
().
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time. When scanning finishes,
place the next original and press the [BLACK & WHITE
START] key ( ). Repeat until all pages have been
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
When the relay machine receives the fax, it will automatically
transmit the fax to each of the end receiving machines
programmed in the memory box.
11
Quick File
File
Special Modes
Sub Address
Speaker
Resend
Scan Send
Auto
Address Book
Fax
Mode Switch
Direct TX
Memory TX
Auto Reception
Ready to send.
Image
Settings
Fax Memory:100%
A4
(1)
Sub Address
Global
AAA AAA
EEE EEE
CCC CCC
DDD DDD
BBB BBB
FFF FFF
ABCD EFGHI JKLMN
OPQRST
UVWXYZ
1/1
Frequent Use
Condition
Settings
Address Review
Cc
To
Sort Address
(2)(3)