MX-2300N/2700N/3500N/3501N/4500N/4501N Operation-Manual System-Settings-Guide GB
Table Of Contents
- Table of Contents
- About This Manual
- System Settings
- SYSTEM SETTINGS (GENERAL)
- SYSTEM SETTINGS (ADMINISTRATOR)
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- User Control
- Energy Save
- Operation Settings
- Device Control
- Copy Settings
- Network Settings
- Printer Settings
- Image Send Settings
- Document Filing Settings
- List Print (Administrator)
- Security Settings
- Enable/Disable Settings
- Change Administrator Password
- Product Key
- Storing/Calling of System Settings
8
Login by user number
1
Enter your user number with the
numeric keys.
Each entered digit will be displayed as " ".
2
Touch the [OK] key.
• When a user number is set to a 8-digit number, this step is not necessary. (When an user number is entered, login
will take place automatically.)
• This completes the login procedure. After login, the system settings can be used.
For the procedure following login, see "When User Authentication is not Enabled" (page 5).
• To configure and store LDAP settings, click [Network Settings] and then [LDAP Settings] in the Web page menu.
(Administrator rights are required.)
• When Auto Clear activates, logout automatically takes place.
• To logout...
Press the [LOGOUT] key ( ). (Except when entering a fax number.)
Enter your user number.
Admin Login
Enter your user number.
OK