MX-2300G/N/2700G/N Operation-Manual Quick-Start-Guide GB

11
LOGOUT
Main power
indicator
[CLEAR ALL] key
Press this key to redo an operation
from the beginning.
All settings will be cleared and
operation will return to the initial state.
Numeric keys
These are used to enter the number of
copies, fax numbers, and other numbers.
[LOGOUT] key ( )
When user authentication is enabled,
press this key to log out after using the
machine. When using the fax function,
this key can be pressed to send tone
signals on a pulse dial line.
[#/P] key ( )
Press this key to use a job program
when using the copier function. When
using the fax function, press this key to
dial using a program.
[BLACK & WHITE START] key
Use this key to copy or scan an original
in black and white. This key is also used
to send a fax in fax mode.
Use this key to activate power save mode. The
[POWER SAVE] key blinks when the machine
is in power save mode. This key is also used
to deactivate power save mode.
[COLOUR START] key
Use this key to copy or scan an original in
colour.
This indicator lights
when the main power
is switched on.
[POWER] key
Use this key to turn the
machine power on and
off.
[POWER SAVE] key
[CLEAR] key
Press this key to return settings such as the
number of copies to "0".
[STOP] key
Press this key to stop a copy job or scanning of
an original.
01‑1Quick(General).fm11ページ２００５年１０月１３日 木曜日 午後５時６分