MX-2300G/N/2700G/N Operation-Manual GB

4
(1) Original misfeed
Open the document feeder
cover and remove the misfed
originals.
Pull out the document feeder
tray and remove the misfed
paper.
Open the automatic
document feeder. Rotate the
transfer roller in the direction
of the arrow and remove the
original.
(2) Paper misfeed in the output area
(3) Paper misfeed in the fusing unit
Rotate knob and remove the
misfed paper.
If the misfed paper is inside
the fusing area, turn down
the fusing unit open tab to
open the fusing unit and
remove the misfed paper.
Rotate knob and remove the
misfed paper.
(4) Paper misfeed in the exit tray unit (right
tray)
After removing the misfeed, open and close the
automatic document feeder (or the document feeding
area cover or document feeder tray) to clear the
misfeed display from the touch panel.
Caution
The fusing unit area is hot. Take care not to burn
yourself. (Do not touch any metal parts.)
Unfused toner may remain on the paper that is
removed. Take care that it does not soil your hands or
clothing.
mx2700extrb.book4ページ２００５年９月１４日 水曜日 午後４時４９分