Specifications

18
Basic specications / copier specications
Name MX-4112N / MX-5112N
Type Desktop
Colour Full colour
Copier system Laser electrostatic copier
Scanning
resolution
Scan (B/W): 600 × 600 dpi, 600 × 400 dpi
Scan (full colour): 600 × 600 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper
sizes
Max. A3 (11" × 17”) for sheets and bound documents
Copy sizes
A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency lm, Heavy paper, Envelopes
Tray 1-4: A3, B4, A4, A4R, B5, B5R, A5R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2", 8-1/2" × 13-2/5",
8-1/2" × 13", 8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R, 5-1/2" × 8-1/2"R
Multi-bypass tray: A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency lm, Heavy paper,
Envelopes
Lost margin (leading edge): 4 mm (11/64") ± 1 mm (± 3/64")
Lost margin: (trailing edge): 2 mm (6/64") - 5 mm (- 13/64")
Leading edge / trailing edge: total 8 mm (21/64") or less
Near edge / far edge: total 4 mm (11/64") ± 2 mm (± 6/64") or less
Warm-up time
MX-4112N MX-5112N
30 seconds 34 seconds
 This may vary depending on the ambient conditions.
First-copy time
MX-4112N MX-5112N
Full colour: 6.7 seconds 5.7 seconds
B/W: 4.7 seconds 4.1 seconds
 This may vary depending on the state of the machine.
Continuous
copying speeds*
(when shifter is
not in operation)
MX-4112N
A4, 8-1/2" × 11" B5, 7-1/4" × 10-1/2" 41 copies/min.
A4R, 8-1/2" × 11"R B5R, 7-1/4" × 10-1/2"R 26 copies/min.
B4, 8-1/2" × 14" 22 copies/min.
A3, 11" × 17" 19 copies/min.
MX-5112N
51 copies/min.
31 copies/min.
26 copies/min.
23 copies/min.
* Continuous speed for same original source. Output may be temporarily interrupted to stabilize
image quality.
Copy ratios
Same size: 1:1 ± 0.8 % Enlarge: 115 %, 122 %, 141 %, 200 %, 400 %
Reduce: 25 %, 50 %, 70 %, 81 %, 86 %
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total
376 increments. Can calculate zoom rate when mm is specied.
Paper feed / capacity
500 × 2 sheets in 2 trays plus 100-sheet multi-bypass tray
 Using 80 g/m
2
(21 lbs.) weight paper
Max. paper feed / max. capacity
5,600 sheets in 4 trays (500 × 4) plus 100-sheet multi-bypass tray plus 3,500
sheets in large capacity tray
 Using 80 g/m
2
(21 lbs.) weight paper
Continuous copy Max. 999 copies
Memory
Standard: 2 GB HDD: 160 GB SD card 4 GB PCL accelerator 1 GB
 1 GB = One billion bytes when referring to hard drive capacity. Actual format
capacity is less.
Ambient
environment
Operating
environment
10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa
Standard
environment
20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH)
Required power supply
Local voltage ± 10 % (For the power supply requirements, see the name plate
in the lower corner of the left side of the machine.)
Power consumption Max. 1.84 kW (220 to 240 V) / 1.92 kW (100 to 127 V)
(including options such as the desk)
Dimensions
When MX-RP14 is installed
643* mm (W) × 761 mm (D) × 801 mm (H)
(25-5/16" (W) × 29-61/64" (D) × 31-17/32" (H))
When MX-EF10 is installed
643* mm (W) × 761 mm (D) × 801 mm (H)
(25-5/16" (W) × 29-61/64" (D) × 31-17/32" (H))
* Including the bypass tray
Weight
When MX-RP14 is installed When MX-EF10 is installed
Approx. 118 kg (260 lbs.) Approx. 127 kg (280 lbs.)
Overall
dimensions
With multi-bypass
tray extended
982 mm (W) × 695 mm (D) (39-9/32" (W) × 27-13/16" (D))
With right side exit
tray extended
969 mm (W) × 695 mm (D) (38-49/64" (W) × 27-13/16" (D))
SPECIFICATIONS