Service manual

MX-FNX1/MX-PNX1 EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 4

C. Motors, solenoids, and PWB

(1) MX-FNX1

No. Signal Name Function

1 FFSM Staple motor Drives the stapling mechanism. (Stapler unit built-in motor)

2 FSM Staple shift motor Shifts the stapler unit in the F/R direction.

3 FTLM Tray motor Drives the paper load tray up/down.

4 FFJM Alignment motor F Drive the alignment guide on the F side.

5 FRJM Alignment motor R Drive the alignment guide on the R side.

6 FSWM Roller upper/lower roller Drives the bundle exit roller up/down.

7 FAM Bundle exit motor Drives the bundle exit roller and the paddle.

8 FRM Transport motor Drives the inlet port roller, the feed roller, and the take-up belt.

9 FPDS Paddle one-rotation solenoid Trigger solenoid for paddle one-rotation.

10 FSLS Paper surface detection solenoid Drives the lever for paper holding and detection of the tray paper surface.

11 FBRS Belt separation solenoid Trigger solenoid for up/down shift of the take-up belt.

12 FINRPS Flapper solenoid Drives the flapper to select the entry path between the finisher inside and the reverse path.

13 FFAN Fan Cools the inlet port of the finisher.

14 – Control PWB Controls the inner finisher.