Service manual

MX-FNX1/MX-PNX1 SPECIFICTIONS 2 – 1
âºíuÇ´
Service Manual
[2] SPECIFICTIONS
1. MX-FNX1
2. MX-PNX1A/B/C/D
*1: Auto switching: 2 holes/3 holes
Type Inner finisher
Loading method Offset tray
Transport speed 23, 27, 35, 45 PPM
Tray type Offset tray
Transport reference Center reference
Paper exit direction Face down
Paper weight Plain paper: 60 to 105g/m
2
(16 to 28 lbs)
Thin paper: 55 to 59g/m
2
(15 to 16 lbs)
Heavy paper: 106 to 209g/m
2
(28 to 56 lbs)
Special paper: OHP sheet, label sheet, envelopes, tab paper: Limited to non-sort (up to 10 sheets).
Mode type Non-stapled, stapled
Paper sizes allowed for offset A3, B4, A4, A4R, B5, 8K, 16K, 11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 8.5" x 11"R
Offset quantity 30mm, 1.2 inch
Discharged paper size A3, B4, A4, A4R, A5R, B5, B5R, 8K, 16K, 16KR, 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 8.5" x 11"R,
5.5" x 8.5"R, 7.25" x 10.5"R, A3 wide, special paper
Sortable size Metric series Large size: A3, B4, 8K
Small size: A4, A4R, B5, 16K
Inch series Large size: 11" x 17", 8.5" x 14", 8.5" x 13"
Small size: 8.5" x 11", 8.5" x 11"R
Stack tray max. load capacity Large size: Max. 250 sheets or max. 30 sets or 35.5mm
Small size: Max. 500 sheets (For special paper, max. 10 sheets can be loaded on the tray.) or max. 30 sets or 71mm
Staplable paper weight 60 to 128g/m
2
(16 to 34 lbs) * However, "106 to 128g/m
2
(28 to 34 lbs)" is enable only for two sheets.
Staplable paper size A3, B4, A4, A4R, B5, 8K, 16K, 16KR, 11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 8.5" x 11"R
Staplable paper quantity (Max.) Max. 50 sheets (for small size, 90g/m
2
(24 lbs))
Max. 30 sheets (for large size, 90g/m
2
(24 lbs))
Stapling 3 kinds (One position in front, one position backward, 2 positions).
Staple supply system Staple sheet cartridge replacement system (Staple cartridge (Approx. 5,000 x 3 pcs.) MX-SCX1)
Staple detection Staple empty detection (Near empty detection: 20 staples remained)
Manual stapling No
External dimensions (W x D x H) 440 x 595 x 205 (mm), 17 21/64 x 23 27/64 x 8 5/64 (inch)
(with tray extended: 640 x 595 x 205 (mm), 25 12/64 x 23 27/64 x 8 5/64 (inch))
Weight Approx. 13kg (28.7 lbs)
Power source Supplied from the main unit power source. (DC24V, DC5V)
Power consumption 55.2W
Installation/maintenance Installed by service personnel
Optional detection Auto detection supported
Packaged items Parts for mounting, operational sheet, staple directional instruction label, installation cautionary note
Type Punch unit for the inner finisher
Punch type 2 holes / 3 holes / 4 holes / 4 holes (wide)
A punch unit that provides all of these 4 types can be installed.
Transport speed 23, 27, 35, 45 PPM
Transport reference Center reference
Punch dust full detection YES (Lever system)
Paper exit direction Face down
Paper weight Plain paper: 60 to 105g/m
2
(16 to 28 lbs)
Thin paper: 55 to 59g/m
2
(15 to 16 lbs)
Heavy paper: 106 to 209g/m
2
(28 to 56 lbs)
Punchable paper size 2 holes
(MX-PNX1A)
A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 8.5" x 11"R, 8K, 16K, 16KR
3 holes *1
(MX-PNX1B)
3 holes: A3, A4, 11" x 17", 8.5" x 11"
2 holes: 8.5" x 14", 8.5" x 13", 8.5" x 11"R
4 holes
(MX-PNX1C)
A3, A4
4 holes (wide)
(MX-PNX1D)
A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11", 8.5" x 11"R
Power source Supplied from the inner finisher. (DC24V, DC5V)
External dimensions (W x D x H) 105 x 518 x 170 (mm), 4 9/64 x 20 25/64 x 6 45/64 (inch)
Weight Approx. 3.5kg (7.7 lbs)
Packaged items Parts for mounting, instructional label for punch direction, instructional label for garbage pickup, installation cautionary note