Specifications

- 9 -
2
SETUP IN A WINDOWS
ENVIRONMENT
INSTALLING THE SOFTWARE
USING THE MACHINE WITH A USB CONNECTION
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the "Cancel"
button to close the window and disconnect the
cable.
2
Insert the CD-ROM into your
computer's CD-ROM drive.
3
Click the "start" button, click "My
Computer" ( ), and then double-click
the CD-ROM icon ( ).
• On Windows Vista/7, click the "Start" button,
click "Computer", and then double-click the
CD-ROM icon.
• On Windows 2000, double-click "My
Computer", and then double-click the CD-ROM
icon.
4
Double-click the "setup" icon ( ).
On Windows Vista/7, if a message screen
appears asking you for confirmation, click "Allow".
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
6
Read the "Readme First" in the
"Welcome" window and then click the
"Next" button.
7
To install all of the software, click the
"Standard" button and go to step 11.
To install particular packages, click
the "Custom" button and go to next
step.
• If you need to use a different connection method after installing the software using a USB or network
connection, you must first uninstall the software and then install it using the new connection method.
• In the following explanations it is assumed that the mouse is configured for right hand operation.
• The scanner feature only works when using a USB cable.
• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is
solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"
button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
Note
The cable will be connected in step 12.
Note
You can show the "SOFTWARE LICENSE"
in a different language by selecting the
desired language from the language menu.
To install the software in the selected
language, continue the installation with that
language selected.
Note