Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- BEFORE INSTALLATION
- SETUP IN A WINDOWS ENVIRONMENT
- SETUP IN A MACINTOSH ENVIRONMENT
- PRINTING FROM WINDOWS
- PRINTER UTILITIES (WINDOWS)
- PRINTING FROM MACINTOSH
- WEB FUNCTIONS IN THE MACHINE
- BEFORE USING THE SCAN TO USB AND NETWORK SCANNER FUNCTION
- USING THE NETWORK SCANNER FUNCTION
- TROUBLESHOOTING
- SHARPDESK CD-ROM (for Windows)
- SPECIFICATIONS
- 77 -
1
2
SPECIFICATIONS
PRINTER SPECIFICATIONS
*
1
300 dpi can only be selected when using the PCL6 printer driver.
*
2
For information on machine memory, see the manual for the machine.
*
3
Available only if the PS3 expansion kit (MX-PK10) is installed.
Printing speed Max. 20 ppm (when printing on A4 or 8-1/2" x 11" size paper)
Resolution 600 dpi / 300 dpi*
1
Network expansion kit memory*
2
128 MB
Emulation PCL6, PS3 (PostScript 3)*
3
Installed fonts PCL6 compatible: 80 outline fonts and 1 bitmap font
PostScript 3 compatible*
3
: 136 outline fonts
Interface 10Base-T/100Base-TX Ethernet, USB 2.0 (Full Speed / Hi Speed compatible
interface)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note