Specifications

- 64 -
9
USING THE NETWORK
SCANNER FUNCTION
BASIC TRANSMISSION PROCEDURE
1
Press the [MODE SELECT] key to
select scanner mode.
The "SCAN" indicator
lights up to indicate that
scanner mode is selected.
2
Make sure that the "SCAN USING:
USB/NETWORK" is shown on the
display. Then press [OK] to enter
Scan to USB and Network Scan mode.
(The initial display will be
"SCAN USING: SCAN TO
USB".)
3
Place the original in the document
feeder tray or on the document glass.
For information on how to place the original, see
"IMAGE ORIENTATION AND STANDARD
ORIGINAL LOADING ORIENTATION" (p.68).
4
Select "ADDRESS SEARCH" and then
press the [OK] key.
The selections change as
follows each time the [ ]
key ( ) is pressed:
"INPUT ADDRESS"
→"GLOBAL
ADDRESS"→"ADDRESS
SEARCH". If you continue
to press the [ ] key ( ),
the stored destinations will
appear in alphabetical
order based on the initial
stored for each
destination.
5
Enter search characters and press the
[OK] key.
You will search the names
that were entered for the
destinations. Destinations
matching the search
characters will appear. To
enter characters, see
"HOW TO ENTER
CHARACTERS" (p.68).
6
Press the [ ] key ( ) or [ ] key ( )
to select the destination and then
press the [OK] key.
7
Press the [ ] key ( ) or [ ] key ( )
to select the original size and then
press the [OK] key.
The original size changes
as follows each time the
[ ] key ( ) or [ ] key
( ) is pressed:
"A4" → "B5" → "A5"→
"8.5x14" → "8.5x13" →
"8.5x11" → "8.5x5.5" .
SCAN USING:
USB/NETWORK
SCAN USING:
ADDRESS SEARCH
SCAN USING:
S
ORIG. SIZE ENTER
A4