Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- BEFORE INSTALLATION
- SETUP IN A WINDOWS ENVIRONMENT
- SETUP IN A MACINTOSH ENVIRONMENT
- PRINTING FROM WINDOWS
- PRINTER UTILITIES (WINDOWS)
- PRINTING FROM MACINTOSH
- WEB FUNCTIONS IN THE MACHINE
- BEFORE USING THE SCAN TO USB AND NETWORK SCANNER FUNCTION
- USING THE NETWORK SCANNER FUNCTION
- TROUBLESHOOTING
- SHARPDESK CD-ROM (for Windows)
- SPECIFICATIONS
- 35 -
USING THE PRINTER UTILITY
STARTING UP THE PRINTER UTILITY
If the Printer Status Monitor is not running, use the following procedure to start the utilities.
Printer Status Monitor
Click the "Start" button, point to "All Programs" ("Programs" in Windows 2000) and then "SHARP Printer Status
Monitor". Select "Printer Status Monitor".
USING THE PRINTER UTILITY
For information on using the Printer Status Monitor, see the Help file. The Help file can be viewed as follows:
Printer Status Monitor
Click the "Start" button, point to "All Programs" ("Programs" in Windows 2000) and then "SHARP Printer Status
Monitor". Select "Help".
CHANGING THE PRINTER STATUS MONITOR
SETTINGS
Once installed, the Printer Status Monitor normally runs in the background in Windows. If you need to change the
Printer Status Monitor settings, follow the steps below.
1
Right-click the Printer Status Monitor
icon ( ) on the task bar, and select
"Preferences" from the pop-up menu.
2
Change the Printer Status Monitor
settings as desired.
For information on the Printer Status Monitor
settings, see Printer Status Monitor Help. (Click
the "Help" button in the settings window.)
If the Printer Status Monitor icon does not
appear on the task bar, see "STARTING UP
THE PRINTER UTILITY" (p.35) to start the
Printer Status Monitor.
Note