Specifications

- 19 -
CONFIGURING THE PRINTER
DRIVER
After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper
trays on the machine and the size of paper loaded in each tray.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers
and Faxes".
• In Windows Vista/7, click the "Start" button,
click "Control Panel" and then click "Printer".
• In Windows Server 2003, click the "Start"
button and then click "Printers and Faxes".
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Printers".
2
Click the "SHARP XX-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
• If you are using Windows
2000/XP/Server 2003/
Vista/Server 2008/7, go to
step 3
.
• In Windows Vista/7, from the
"Organize" menu select
"Properties".
3
Click the "Configuration" tab and set
the printer configuration based on the
options that have been installed.
Set the printer configuration properly. Otherwise,
printing may not take place correctly.
4
Click the "Set Tray Status" button and
select the size of paper that is loaded
in each tray.
Select a tray in the "Paper
source" menu, and select the
size of paper loaded in that tray
from the "Set Paper Size"
menu. Repeat for each tray.
5
Click the "OK" button in the "Set Tray
Status" window.
6
Click the "OK" button in the printer
properties window.
7
To automatically configure the settings
based on the detected machine status, click
the "Auto Configuration" button.
Note