Specifications

- 11 -
SETUP IN A WINDOWS ENVIRONMENT
CONNECTING A USB CABLE
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the
appropriate cable for your computer.
1
Insert the cable into the USB
connector on the machine.
2
Insert the other end of the cable into
your computer's USB port.
• USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows
2000 Professional, Windows XP, Windows Vista or Windows 7 preinstalled.
• Do not connect the USB cable before installing the printer driver. The USB cable should be connected during
installation of the printer driver.
• If the machine will be connected using a USB 2.0 port of your computer, please purchase a USB cable that
supports USB 2.0.
• To obtain the fastest USB 2.0 data transfer speed, "USB2.0 MODE SWITCH" in the machine's user programs
must be set to "HI-SPEED". For more information, see the Operation Guide of the machine.
• Use the machine's "HI-SPEED" mode only when using a computer that is running Windows 2000/XP/Vista or
7.
• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC
card supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the
manufacturer of your PC card.
• Connection is also possible using a USB 1.1 port on your computer. However, the specifications will be USB
1.1 specifications (Full-Speed).
Caution
Note