Government Compliance

Page 9 of 13
Criteria Supporting Features Remarks and explanations
(h) When a product permits a user to adjust color and
contrast settings, a range of color selections capable
of producing a variety of contrast levels shall be
provided.
Not Applicable There is no color display.
(i) Products shall be designed to avoid causing the
screen to flicker with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports Conforms
(j) (1) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
The position of any operable control shall be
determined with respect to a vertical plane, which is
48 inches in length, centered on the operable control,
and at the maximum protrusion of the product within
the 48 inch length on products which are freestanding,
non-portable, and intended to be used in one location
and which have operable controls.
Supports with Limitations Applicable (desktop configuration).
(j)(2) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Where any operable control is 10 inches or less
behind the reference plane, the height shall be 54
inches maximum and 15 inches minimum above the
floor.
Supports
Applicable.
Operable control is 3.9 inches behind the reference
plane.
The height is 10.4 inches above the bottom of
machine.
Therefore it is applicable (desktop configuration).
(j)(3) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Where any operable control is more than 10 inches
and not more than 24 inches behind the reference
plane, the height shall be 46 inches maximum and 15
inches minimum above the floor.
(j)(4) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Operable controls shall not be more than 24 inches
behind the reference plane.
Return to the top of the page.