Owner's Manual

7-36
SYSTEM SETTINGS
Contents
Copy Function Settings
Item Factory default setting Page
■ Copy Function Settings
7-68
● Initial Status Settings
7-68
X Color Mode Full Color
X Paper Tray Tray 1
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 7-69
X Copy Exposure Adjustment
7-69 Color 5
 Black & White 5
X Add or Change Extra Preset Ratios – 7-69
X Setting a Maximum Number of Copies 999 7-69
X Initial Margin Shift Setting
7-69 Side 1 1/2"
 Side 2 1/2"
X Erase Width Adjustment
7-69
 Edge Clearance Width 1/2"
X Card Shot Settings
7-69 Original Size X: 3-3/8", Y: 2-1/8"
 Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 7-69
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-69
X Disabling of Auto Paper Selection Disabled 7-69
X Auto Selection of Paper Tray that was Last Loaded Disabled 7-70
X Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-70
X Color Quick Scan from Document Glass Disabled 7-70
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-70
X B/W Quick Scan from Document Glass Disabled 7-70
● Color Adjustments 7-71
X Initial Color Balance Setting Factory default 7-71
X Auto Color Calibration – 7-71