Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- BEFORE USING THE MACHINE
- PRINTER
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- SYSTEM SETTINGS
- WEB FUNCTIONS IN THE MACHINE
- ABOUT THE WEB PAGES
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- CONFIGURING SMTP AND DNS SERVER SETTINGS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
- TRADEMARK ACKNOWLEDGMENTS
81
ROUTINE MAINTENANCE
(4) Push down and close the laser unit cover.
5
Repeat step 4 to clean all holes in the laser unit (4 holes).
There are a total of 4 places to be cleaned in the laser unit, including the hole cleaned in step 4. Clean all holes.
6
Replace the cleaning tool.
(1) Rotate the cleaning tool after putting it on the boss and hook its
edge (the side that does not have a handle) to the claw on the left
side. Hook the cleaning tool with the clean side face up.
(2) Place the right-hand side of the cleaning tool on the inner side,
spread across the top of the claw.
(3) Hook the cleaning tool to the claw.
7
Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (p.76), push the
toner collection container into the machine.
Cover