Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- BEFORE USING THE MACHINE
- PRINTER
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- SYSTEM SETTINGS
- WEB FUNCTIONS IN THE MACHINE
- ABOUT THE WEB PAGES
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- CONFIGURING SMTP AND DNS SERVER SETTINGS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
- TRADEMARK ACKNOWLEDGMENTS
71
TROUBLESHOOTING
3
Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
4
If the misfed paper cannot be removed, remove the paper by pulling it into the paper
output area.
Be careful not to tear the misfed paper during removal.
5
Lift the part with the green label that protrudes from the fusing unit paper guide, and
close the fusing unit paper guide.
6
Lift the fusing unit release levers, to return them to their operating positions.
7
Close the side cover.
The message " Clear paper path." will be cleared and printing will be
possible.
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or injury.
• When removing misfed paper, do not touch or damage the transfer
belt.
• Be careful about unfixed toner on the misfed paper not to soil your
hands or clothes.
• When closing the side cover, press on the handle.
• If the paper was torn, make sure that no torn pieces remain in the
machine.
• If the message does not clear, check again to make sure that no
pieces of paper remain.
Warning
Caution
Note