MSDS

MATERIAL SAFETY DATA SHEET Page : 3/5
Date Issued : Sep.14, 2010
MSDS NoF-31981
7. HANDLING AND STORAGE
Handling
Technical Measures : None
Precautions : None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during long
term exposure, as with any non-toxic dust. Try not to disperse the particles.
Storage
Technical Measures : None
Storage Conditions : Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products : None
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures
Ventilation : Not required under intended use.
Exposure Limit Values             
OSHA-PEL(USA) : 15mg/m
3
(Total Dust) , 5mg/m
3
(Respirable Dust)
ACGIH-TLV(USA) : 10mg/m
3
(Total Dust) ,3mg/m
3
(Respirable Dust)
Personal Protective Equipment
Respiratory Protection : Not required when used as intended in Sharp equipment.
Hand Protection : Not required when used as intended in Sharp equipment.
Eye Protection : Not required when used as intended in Sharp equipment.
Skin Protection : Not required when used as intended in Sharp equipment.
Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large
quantity of toner or during long term exposure, as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State : Solid Form : Powder Color : Black Odor : odorless
Ph : Not applicable
Boiling / Melting Point : Not applicable
Flash Point(°C) : Not applicable
Ignition Point(°C ) : No data
Explosion Properties : No data
Density(g/cm³) : Approx.5.0 (bulk density : Approx. 2.0)
Solubility in Water : Negligible
10. STABILITY AND REACTIVITY
Stability : Stable
Hazardous Reactions : Dust explosion, like most finely divided organic powders.
Conditions to Avoid : Electric discharge, throwing into fire.
Materials to Avoid : Oxidizing Materials
Hazardous Decomposition Products : CO, CO
2
and NO
X
Further Information : None