Operation Manual

7-26
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a large capacity tray (MX-LC12) is installed.
*2 When a large capacity tray (MX-LCX3 N) is installed.
*3 When the large capacity trays are installed.
*4 When a saddle stitch finisher is installed.
*5 When a status indicator is installed.
*6 When a finisher (100-sheet stapling)/saddle stitch finisher (100-sheet stapling) is installed.
*7 This setting is configured in setting mode on the machine.
*8 When a finisher/saddle stitch finisher is installed and a punch module is installed.
*9 When a colour-related problem has occurred.
*10 When a large capacity tray is installed.
*11 When an Inserter is installed.
*12 When a folding unit is installed.
*13 When a trimming module is installed.
*14 This setting is configured in setting mode on the web page.
• Disabling of Punch
*8
Disabled No Yes
• Disabling of Folding Unit
*12
Disabled No Yes
• Disabling of Trimming Module
*13
Disabled No Yes
• Disabling of Colour Mode*
9
Disabled No Yes
• Disabling of Master Machine Mode Disabled No Yes
• Disabling of Client Machine Mode Disabled No Yes
 Security Settings No Yes
• Hidden Pattern Print Setting No Yes
- Disable Direct Entry Disabled No Yes
 Machine Identification Settings – No Yes
 Clock Adjust No Yes
 Clock Adjust No Yes
• Current Date – No Yes
• Specify Time Zone – No Yes
• Date&Time Settings – No Yes
• Synchronize with Internet Time Server Disabled No Yes
 Daylight Saving Time Setting Disabled No Yes
 Date Format No Yes
• Current Setting – No Yes
• Format Varies depending on country and
region
No Yes
 Product Key No Yes
 Serial Number – No Yes
 Font Kit for Barcode – No Yes
 Application Integration Module – No Yes
 Custom Links
*14
– No Yes
Setup Items Factory default setting U A