Operation Manual

8-33
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a large capacity tray (MX-LC12) is installed.
*2 When a large capacity tray (MX-LCX3 N) is installed.
*3 When the large capacity trays are installed.
*4 When a facsimile expansion kit is installed.
*5 When an internet fax expansion kit is installed.
*6 When a saddle stitch finisher is installed.
*7 When a status indicator is installed.
*8 When a finisher (100-sheet stapling)/saddle stitch finisher (100-sheet stapling) is installed.
*9 This setting is configured in setting mode on the machine.
*10 When a finisher/saddle stitch finisher is installed and a punch module is installed.
*11 When a colour-related problem has occurred.
*12 When a large capacity tray is installed.
*13 When an Inserter is installed.
*14 When a folding unit is installed.
*15 When a trimming module is installed.
*16 This setting is configured in setting mode on the web page.
X Product Key No Yes
 Serial Number – No Yes
 Font Kit for Barcode – No Yes
 Internet Fax Expansion Kit
*5
– No Yes
 Application Integration Module – No Yes
X Custom Links
*16
– No Yes
Setup Items Factory default setting U A