Operation Manual

8-20
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 This function is not available in some countries and regions.
Fax Data Receive/Forward (Manual)
*1 When a facsimile expansion kit is installed.
*2 When an internet fax expansion kit is installed.
Inbound Routing (Forwarding/Storing) Settings
- Set I-Fax Own Name – No Yes
-Own Address – No Yes
• Direct SMTP Setting No Yes
- Port Number (Receive) 25 No Yes
- Timeout 300 seconds No Yes
- Port Number (Send) 25 No Yes
- Timeout 300 seconds No Yes
Setup Items Factory default setting U A
● Fax Data Receive/Forward (Manual) (page 8-114)
X Fax Settings
*1
See "Fax Data Receive/Forward
(Manual) (page 8-198)".
Yes Yes
X Internet Fax Settings
*2
Yes Yes
 Reception Start – Yes Yes
 Manual Reception Key in Initial Screen Enabled Yes Yes
 Forward Received Data – Yes Yes
Setup Items Factory default setting U A
● Inbound Routing (Forwarding/Storing) Settings (page 8-115)
*
X Inbound Routing Settings Yes Yes
 Display Items
10
Yes Yes
 Table Registration Yes Yes
• Table Name
–
Yes Yes
 Sender Settings for Received Data Yes Yes
• Receive Line Select Yes Yes
- Internet Fax
Enabled
Yes Yes
-Fax
Enabled
Yes Yes
• Sender Address Setting Forward All Received Data Yes Yes
 Forwarding Destination Settings for Received Data Yes Yes
• Forward Condition 1 to 3 Yes Yes
- Forward Condition No Forwarding Yes Yes
- Day of the Week All Invalid Yes Yes
- Set Forwarding Time
Disabled
Yes Yes
- Start Time 00 Hour 00 Minute Yes Yes
Setup Items Factory default setting U A