Operation Manual

2-104
COPIER►OTHER FUNCTIONS
• Mixed originals cannot be used in combination with the following functions:
Standard size setting or size entry setting for the Original Size, folding setting other than Z-Fold
If different widths are selected for mixed originals, the following functions cannot be used.
Staple, Punch, N-Up, Offset, Booklet, Full Bleed Copy
• The mixed size original function cannot be used to copy originals that are the same size but are placed in different
orientations (A4 and A4R (8-1/2" x 11" and 8-1/2" x 11"R), etc.).
To set the machine to always scan mixed originals
• In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Original Feeding
Mode].
• Output, N-Up, and other functions will have the same settings as the first page.
1
Tap the [Others] key, and tap the [Mixed Size Original] key.
2
Tap the [Same Width] key or the
[Different Width] key as appropriate for
the originals.
After the settings are completed, tap twice.
To cancel the mixed size original setting
Tap the [Off] key.
3
Place the original face up on the
document feeder tray.
Place the original as shown on the Mixed Size Original
screen.
For mixed size originals, set "Original" to "Auto".
4
Tap the [Colour Start] or [B/W Start] key to start copying.
B/W
Start
Colour
A4
B4
A3
3
4
Proof Copy
CAPreview
Start
Others
Mixed Size Original
Off
Same Width
Place the same width
originals.
Different Width
Back
Change Size/Direction.
Original
2-Sided Copy
A3 (11" x 17")
B4 (8-1/2" x 14")
A3(11" x 17")
Place the originals with the
corners aligned together in
the far left corner.
B4 (8-1/2" x 14")