Operation Manual

2-58
COPIER►BASIC PROCEDURE FOR MAKING COPIES
• You can view the specified folding type in "PREVIEW SCREEN (page 1-17)".
• A saddle stitch finisher is required to use Saddle Fold.
• A folding unit is required to use Half Fold, C-Fold, Accordion Fold, Double Fold, and Z-Fold.
• Special media such as transparency film and tab paper cannot be used.
• The paper folding function cannot be used with the staple and hole punch function. However, it can be used with them if
the paper size for Z-folding is set to A3, B4 or 11" × 17".
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Tap the [Output] key.
3
Tap the [Fold] tab, and tap the folding
type key.
To cancel the paper folding function:
Tap the [Off] key.
4
Tap the [Detail] key.
For the setting method, see "Detail Type for each Folding
Type (page 2-59)".
After the settings are completed, tap .
B/W
A4
B4
A3
3
4
Proof Copy
CAPreview
Start
Colour
Start
1
Others
Upper Tray
Middle
Tray
Lower Tray
Output Tray
Output
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
2-Sided Copy
Offset
No. of copies
Separator Page
Sort/Group Staple Punch Fold
Off
Saddle
Fold
Half
Fold
C-Fold
Accord-
ion Fold
Double
Fold
Z-Fold
Detail
1
Others
Upper Tray
Middle
Tray
Lower Tray
Output Tray
Output
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
2-Sided Copy
Offset
No. of copies
Separator Page
Sort/Group Staple Punch Fold
Off
Saddle
Fold
Half
Fold
C-Fold
Accord-
ion Fold
Double
Fold
Z-Fold
Detail
B/W
Start
Colour
Start
A4
B4
A3
3
4
Proof Copy
CAPreview