Operation Manual

1-167
BEFORE USING THE MACHINE►MAINTENANCE
4
Slowly insert the new toner cartridge
on the level.
A toner cartridge of a different colour cannot be installed. Be sure to install a toner cartridge of the same colour.
5
Push the cartridge in until it locks
securely in place.
6
Close the toner cover.
After the toner cartridge is replaced, the machine
automatically enters image adjustment mode. Do not open
the front cover while this is taking place.
• Do not throw a toner cartridge into a fire. Toner may fly and cause burns.
• Store toner cartridges out of reach of small children.
•
If a toner cartridge is stored upright, the toner may harden and become unusable. Always store toner cartridges on their side.
• If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and
performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
• Be sure to install four toner cartridges (Y/M/C/Bk).
• If any one of the toner colours runs out, colour printing will no longer be possible.
If the Y, M, or C toners run out but a quantity of Bk toner still remains, printing is performed in black and white.
• Depending on your conditions of use, the colour may become light or the image blurred.
• Your service technician will collect used toner cartridges.
• To view the approximate amount of toner remaining (indicated in %), hold down the [Home Screen] key during printing or
in standby mode. When the percentage falls to "25-0%", keep a toner cartridge for replacement purposes before toner runs
out.
• When toner runs out while the home screen is displayed, the "Toner Empty" message appears in the upper right corner of
the screen.