User Manual

11
First check the following items
How to connect this machine
Related topics
• "Software CD-ROM" included in this
machine P.6
• CD-ROM provided with the extension kit
P. 7
• Operating environment of the computer
P. 8
• Conditions of software use P.10
• Windows/Display the software selection
screen (common procedure) P.12
• Windows/Utility Software installation
P.31
• Macintosh/Installing the printer P.35
Troubleshooting
• Cannot install P.41
How to connect this machine
This explains how to connect this machine.
Network connection
Connect a LAN cable (shield type) to the network connector.
After connection and before installing the software, setup the network, such as
setting the IP address. Setup of the network will be done by using the "Network
Settings" of this machine.
• At factory default, when this machine is used in a DHCP environment,
it is setup so that an IP address is automatically allocated.
• When this machine is used in a DHCP environment, the IP address
may be changed and it may not be possible to print. Operate the
WINS server or x the IP address to use the printer.
• When using models with wireless LAN, please refer to the provided
manual for setup.