Specifications

16
SPECIFICATIONS
Printer specifications
*1 When the PS3 expansion kit (MX-PKX1) is installed and the machine is used as a PostScript printer.
*2 Barcode font kit (AR-PF1) is required.
*3 Supported operating systems are Windows 2000 / XP.
Type
Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
Printing resolution
600 x 600 dpi / 1200 x 600 dpi*
1
(black and white printing, rotating output not performed)
Printer driver type
PCL5c, PCL6, PostScript 3 compatible*
1
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL5c, PCL6 80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX
USB (type A): Supports USB 2.0 (Full speed)
USB (type B): Supports USB 2.0 (Hi speed)*
3
Memory
896 MB
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
mx7000_gb_saf.fm 16 ページ ２００６年４月１９日 水曜日 午後３時２８分