Quick Guide

17
Punch module
Name
Punch module (MX-PN11B) for finisher
Paper size for punch module
11" × 17" (A3) to 7-1/4" × 10-1/2"R (A4)
 Cannot punch special types of paper such as OHP.
Holes
3 holes
Required power supply
Supplied from finisher
Weight
Approx. 7 lbs. (3 kg)
Dimensions
3-55/64" (W) × 18-50/64" (D) × 5-26/64" (H)
(98 mm (W) × 477 mm (D) × 137 mm (H))
Fax Specifications
Registered paper size
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5)
Transmission time
Approx. 2 seconds *1 (8-1/2" × 11" (A4) Sharp standard paper, normal
characters, Super G3 (JBIG))
Memory
1GB
Notes
Touch dial memory Max. of 1,000 entries (Including group dialing
for fax, scanner, and Internet fax)
Group dial Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the
International Telecommunications Union (ITU-T). This is the speed for when sending an 8-1/2" × 11" (A4)
size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed
mode (33.6 kbps). This is the transmission speed for image information only and does not include time for
transmission control. The actual time needed for a transmission depends on the content of the text, type
of receiving fax machine, and telephone line conditions.
Name
Facsimile expansion kit (MX-FX11)
Useable lines
General phone lines (PSTN), automated branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-definition: 16 dot/mm × 15.4 line/mm
Connection speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes for transmission
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5) (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
* Internet fax (optional) is up to 800 mm (at 600 x 600 dpi).