Setup guide
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING THE MACHINE AS A NETWORK SCANNER
- ENTERING DESTINATIONS
- BASIC PROCEDURE FOR TRANSMISSION IN SCAN MODE
- SCANNING TO E-MAIL, FTP, DESKTOP, AND NETWORK FOLDER
- CHANGING THE EXPOSURE AND EXPOSURE MODE
- CHANGING THE RESOLUTION
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
- CHANGING THE COLOUR MODE
- CHANGING THE FILE FORMAT
- CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND MESSAGE
- BASIC PROCEDURE FOR SCANNING IN USB MEMORY MODE
- BASIC PROCEDURE FOR TRANSMISSION IN INTERNET FAX MODE
- CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS
- CONVENIENT FUNCTIONS
- SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission)
- WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background)
- SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot)
- SCANNING MANY ORIGINALS AT ONCE (Job Build)
- SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- SCANNING THIN ORIGINALS (Slow Scan Mode)
- STORING SCAN OPERATIONS (Programs)
- FORWARDING A RECEIVED INTERNET FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- INTERNET FAX FUNCTIONS
- SCANNING FROM A COMPUTER (PC SCAN MODE)
88
ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadow lines on images produced when scanning thick originals or books on the
document glass. (This function erases the parts of the image where shadows tend to form. The function does not detect
shadows and erase only the shadows.)
Scanning a thick book
Erase modes
Shadows appear here
Not using the erase
function
Using the erase
function
Shadows appear in the
image.
No shadows appear.
• Shadows at the edges of the original can also be erased when the automatic document feeder is used.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
Select the mode that you wish to use.
(1) Touch the [Mode Switch] key.
(2) Touch the key of the mode that you wish to
use.
Edge erase Centre erase Edge + Centre erase
11
Quick File
File
Special Modes
Address Entry
Address BookFax
Data EntryPC Scan
USB Mem. Scan
Internet Fax
Scan
Mode Switch
Send Settings
Image
Settings
(1) (2)