Setup guide
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING THE MACHINE AS A NETWORK SCANNER
- ENTERING DESTINATIONS
- BASIC PROCEDURE FOR TRANSMISSION IN SCAN MODE
- SCANNING TO E-MAIL, FTP, DESKTOP, AND NETWORK FOLDER
- CHANGING THE EXPOSURE AND EXPOSURE MODE
- CHANGING THE RESOLUTION
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
- CHANGING THE COLOUR MODE
- CHANGING THE FILE FORMAT
- CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND MESSAGE
- BASIC PROCEDURE FOR SCANNING IN USB MEMORY MODE
- BASIC PROCEDURE FOR TRANSMISSION IN INTERNET FAX MODE
- CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS
- CONVENIENT FUNCTIONS
- SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission)
- WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background)
- SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot)
- SCANNING MANY ORIGINALS AT ONCE (Job Build)
- SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- SCANNING THIN ORIGINALS (Slow Scan Mode)
- STORING SCAN OPERATIONS (Programs)
- FORWARDING A RECEIVED INTERNET FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- INTERNET FAX FUNCTIONS
- SCANNING FROM A COMPUTER (PC SCAN MODE)
23
ENTER THE ADDRESS MANUALLY
Destination addresses for Scan to E-mail and Internet fax can be entered manually.
1
Change the mode.
(1) Touch the [Mode Switch] key.
(2) Touch the key of the mode that you wish to
use.
2
Touch the [Address Entry] key.
3
Enter the destination address.
(1) If scan mode is selected, select the type of
delivery.
Normally the [To] key is touched. This specifies the e-mail
address that will be entered as the recipient.
(2) Enter the destination address on the text
entry screen that will appear.
Enter the destination address and touch the [OK] key in
the text entry screen.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
• If you wish the destination to be a Cc destination, touch the [Cc] key.
• The [Bcc] key only appears when Bcc has been enabled using "Bcc Setting" in the system settings (administrator).
If you wish the destination to be a Bcc destination, touch the [Bcc] key.
• When Internet fax mode is selected, you will return to the base screen after entering the destination address;
however, if "I-fax Reception Report On/Off Setting" is enabled in the system settings (administrator), the I-fax
reception report settings screen will appear. If you wish to receive a report, touch the [Yes] key. If not, touch the [No]
key.
• System Settings (Administrator): I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent. When the destination is specified by directly
entering the address, a message will appear asking you if you wish to receive a report.
• System Settings (Administrator): Bcc Setting
This setting enables or disables Bcc delivery. When enabled, the [Bcc] key appears in the Address Book screen and the
delivery type selection screen.
Quick File
File
Special Modes
Address Entry
Address BookFax
Data EntryPC Scan
USB Mem. Scan
Internet Fax
Scan
Mode Switch
Send Settings
Image
Settings
(1) (2)
Quick File
File
Special Modes
Address Entry
Resend
Scan Send
Address Book
Scan
Mode Switch
Image
Settings
Send Settings
Ready to send.
A4
Auto
Select addressee type.
To Cc Bcc