Setup guide
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING THE MACHINE AS A NETWORK SCANNER
- ENTERING DESTINATIONS
- BASIC PROCEDURE FOR TRANSMISSION IN SCAN MODE
- SCANNING TO E-MAIL, FTP, DESKTOP, AND NETWORK FOLDER
- CHANGING THE EXPOSURE AND EXPOSURE MODE
- CHANGING THE RESOLUTION
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
- CHANGING THE COLOUR MODE
- CHANGING THE FILE FORMAT
- CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND MESSAGE
- BASIC PROCEDURE FOR SCANNING IN USB MEMORY MODE
- BASIC PROCEDURE FOR TRANSMISSION IN INTERNET FAX MODE
- CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS
- CONVENIENT FUNCTIONS
- SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission)
- WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background)
- SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot)
- SCANNING MANY ORIGINALS AT ONCE (Job Build)
- SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- SCANNING THIN ORIGINALS (Slow Scan Mode)
- STORING SCAN OPERATIONS (Programs)
- FORWARDING A RECEIVED INTERNET FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- INTERNET FAX FUNCTIONS
- SCANNING FROM A COMPUTER (PC SCAN MODE)
129
7
Select scanning settings while viewing
the image.
[Rotate] button:
Each time this button is clicked, the preview image rotates 90
degrees. This lets you change the orientation of the image
without picking up and placing the original again. The image file
will be created using the orientation that appears in the preview
window.
[Image Size] button:
Click this button to specify the scan area by entering numerical
values. Pixels, mm, or inches can be selected for the units of
the numerical values. If a scanning area has already been
specified, the entered numbers will change the area relative to
the top left corner of the specified area.
button:
To automatically set the scanning area to the entire preview
image, click the button with the preview image displayed
and a scanning area not specified.
• For further information on the scan settings, click the button to open scanner driver Help.
• If the originals are placed in the document feeder tray, only the top page will be previewed. The top page will be
delivered to the original exit tray. Be sure to return the previewed page to the document feeder tray before
previewing again or scanning.
8
Click the [Scanning] button.
Scanning begins. The image appears in your application.
Assign a file name to the scanned image and save it as
appropriate in the software application you are using.