Specifications

13
RECORDING
ENGLISH
Recording Line Sources
Before recording analog signals via the MIC/LINE IN
jack(s), make sure the following switches are set correctly.
INPUT SELECT
Set the INPUT SELECT switch to ANALOG.
“Analog in” appears in the display.
INPUT LEVEL
Set the INPUT LEVEL switch to LINE.
SOURCE
Set the SOURCE switch to specify the kind of source you
are recording and the corresponding input jacks.
• STEREO: To record a stereo source via the MIC/LINE IN (L)
and (R) jacks.
• MONO (Lch): To record a mono source via the MIC/LINE
IN (L) jack.
Recording Digital Sources
Before recording digital signals via the DIGITAL IN jack,
make sure the following switches are set correctly.
INPUT SELECT
Set the INPUT SELECT switch to DIGITAL, during the
unit is stopped. “Digital in” appears in the display.
Note
The record level is set automatically during digital recording.
SOURCE
SP LP
OFF ON
REC MODE
0dB
-15dB
MIC ATTEN
FLAT
ANC
-30dB MIC LINE
INPUT LEVEL
INPUT SELECT
STEREO
HP/SPK MODE
REC LEVEL
LSR
MANUAL
STEREO INT MIC L R
MONO (L ch)
ANALOG DIGITAL
LIMITER
ALC
SOURCE
SP LP
OFF ON
REC MODE
0dB
-15dB
MIC ATTEN
FLAT
ANC
-30dB MIC LINE
INPUT LEVEL
INPUT SELECT
STEREO
HP/SPK MODE
REC LEVEL
LSR
MANUAL
STEREO INT MIC L R
MONO (L ch)
ANALOG DIGITAL
LIMITER
ALC