Operation Manual, User's Manual

2-81
COPIER►OTHER FUNCTIONS
• High Quality Scan from Document Feeder
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [High Quality Scan from
Document Feeder]. The resolution for copying using the automatic document feeder can be changed from 600 x 400 dpi to
600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are reproduced with greater
clarity, however, the scanning speed is slower. When high quality mode is not selected, the following conditions must be
satisfied in order to scan at 600 x 600 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• [Copy of Copy] must not be enabled.
• Quick Scan from Document Glass
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Quick Scan from
Document Glass]. The resolution for copying using the document glass can be changed from 600 x 600 dpi to 600 x 400
dpi (high speed mode). When high speed mode is selected, the first copy time is quicker, however, the copy image is not
as clear. When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400
dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• [Copy of Copy] must not be enabled.