Operation Manual, Software Setup Guide

8
Installation by specifying the machine's address
1
When you are asked how the printer is
connected, select [Specify the MFP IP address]
and click the [Next] button.
Refer to "Custom installation (page 7)" on how to display the
custom installation screen.
2
Enter the name (host name) or IP address of the
machine and click the [Next] button.
• Configure port settings if needed. (Normally no changes
are needed.)
• If you will use the tandem print function, select [Yes].
(Printer driver only)
3
When the model selection window appears,
select the model name of your machine and
click the [Next] button.
You can filter the list by part of the model name, color type,
or speed.
Related topics
• Windows / Select the software to be installed (P. 3)
Troubleshooting
• The software cannot be installed (P. 22)
•
How to check the IP address of this machine (P. 22)
Table of contents X Windows / Select the software to be installed X Installing the printer driver / PC-Fax driver (common procedure) X
Custom installation X