Operation Manual, Software Setup Guide

2
Table of contents
Windows / Select the software to be installed ..... 3
Installing the printer driver / PC-Fax driver (common procedure) ..... 4
• Standard installation / Advanced installation ..... 5
• Custom installation ..... 7
• Installation by specifying the machine's address ..... 8
• Search for the machine and install the driver ..... 10
• Using the IPP function or SSL function to print ..... 11
• Install the driver using an existing port ..... 12
• Installing the driver only ..... 13
• Enable options and peripherals ..... 14
• Changing the port ..... 15
Installing the Printer Status Monitor ..... 16
Installing the scanner driver ..... 17
macOS / Installing the printer driver ..... 18
macOS / Installing the printer driver ..... 18
Printing using the IPP function ..... 20
Troubleshooting ..... 21
Trouble with installation (Windows/macOS) ..... 22
How to setup this machine ..... 22
Problem with Windows ..... 23
Trouble with macOS ..... 24
Please note
• The explanations in this manual assume that you have a working
knowledge of your Windows or macOS computer.
• For information on your operating system, please refer to your
operating system manual or the online Help function.
• The explanations of screens and procedures in this manual are
primarily for Windows® 10 in Windows® environments, and
macOS 10.12 in macOS environments. The screens may vary
depending on the version of the operating system.
• Wherever "xx-xxxxx" appears in this manual, please substitute
your model name for "xx-xxxxx".
• Contents of this manual are general descriptions of products
including other models. Therefore, this manual includes
descriptions of features that are not available for your model.
• In some cases it may not be possible to use the software
described in this manual. This depends on the model and the
expansion kits that are installed.
• This manual contains references to the fax function and Internet
fax function. However, please note that the fax function and
Internet fax function are not available in some countries, regions
and models.
• Considerable care has been taken in preparing this manual. If
you have any comments or concerns about the manual, please
contact your dealer or nearest authorized service representative.
• This product has undergone strict quality control and inspection
procedures. In the unlikely event that a defect or other problem
is discovered, please contact your dealer or nearest authorized
service representative.
• Aside from instances provided for by law, SHARP is not
responsible for failures occurring during the use of the product
or its options, or failures due to incorrect operation of the
product and its options, or other failures, or for any damage that
occurs due to use of the product.
Warning
• Reproduction, adaptation or translation of the contents of the
manual without prior written permission is prohibited, except as
allowed under copyright laws.
• All information in this manual is subject to change without
notice.
• The network cable that is to be connected to this machine
should be a shielded cable that is compliant with the
specifications.
• The display screens, messages, and key names shown in the
manual may differ from those on the actual machine due to
product improvements and modifications.
• The explanations in this manual are based on American English
and the North American version of the software. Software for
other countries and regions may vary slightly from the North
American version.