Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
 - DEAR SHARP CUSTOMER
 - SAFETY PRECAUTIONS
 - TIPS AND SAFETY INSTRUCTIONS
 - MOUNTING PRECAUTIONS
 - Supplied Components
 - Part Names
 - Connecting Peripheral Equipment
 - Connecting the Power Cord
 - Binding Cables
 - Preparing the Remote Control Unit
 - Turning Power On/Off
 - Basic Operation
 - Menu Items
 - Initialization (Reset)/Functional Restriction Setting (FUNCTION)
 - Controlling the Monitor with a PC (RS-232C)
 - Controlling the Monitor with a PC (LAN)
 - Troubleshooting
 - Specifications
 - Mounting Precautions (For SHARP dealers and service engineers)
 
38
E
SCREEN menu
Function
Command Direction
Parameter Reply Control/Response contents *
AUTO ASNC W 1 When the input mode is D-SUB[RGB], DVI-I (analog).
-
CLOCK CLCK WR 0-1200 0-1200 When the input mode is D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
PHASE PHSE WR 0-63 0-63 When the input mode is D-SUB[RGB], DVI-I (analog).
POSITIONING POSITION OF 
THE LONGEST 
DIRECTION
HPOS WR 0-100 0-100 0-800 on D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
POSITION OF 
THE SHORTEST 
DIRECTION
VPOS WR 0-100 0-100 0-200 on D-SUB[RGB], DVI-I (analog).
Varies depending on the signal.
SIZE SIZE OF THE 
LONGEST 
DIRECTION
HSIZ WR 0-100 0-100
SIZE OF THE 
SHORTEST 
DIRECTION
VSIZ WR 0-100 0-100
RESOLUTION
LONGEST 
DIRECTION 
RESOLUTION
HRES WR 300-1920 300-1920 When the input mode is D-SUB[RGB], DVI-I (analog).
Only even numbers are valid for parameters.
Varies depending on the signal.
SHORTEST 
DIRECTION 
RESOLUTION
VRES WR 200-1200 200-1200
RESET ARST W 1
PICTURE menu
Function
Command Direction
Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
○
CONTRAST CONT WR 0-60 0-60
BLACK LEVEL BLVL WR 0-60 0-60
TINT TINT WR 0-60 0-60
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
COLOR 
ADJUSTMENT
COLOR MODE BMOD WR 0 0 STD
○
2 2 VIVID
3 3 sRGB (When the input mode is PC)
4 4 HIGH ILLUMINANCE
WHITE 
BALANCE
THRU CTMP WR 0 0 PC input
PRESET 1-18 1-18
From 1: approximately 3,000K to 15: approximately 10,000K (500K steps)
16: approximately 5,600K, 17: approximately 9,300K, 18: approximately 3,200K
USER 99 99
R-CONTRAST CRTR WR 0-256 0-256 “ERR” when CTMP is not set to 99.
G-CONTRAST CRTG WR 0-256 0-256
B-CONTRAST CRTB WR 0-256 0-256
R-OFFSET OFSR WR -127-127 -127-127
G-OFFSET OFSG WR -127-127 -127-127
B-OFFSET OFSB WR -127-127 -127-127
COPY TO USER CPTU W 0 Copies a preset value to the user setting. -
GAMMA GAMM WR 0-2 0-2 0: 1.8, 1: 2.2, 2: 2.4 (during PC input)
0: LIGHT 2, 2: DARK (during AV input)
○
4-6 4-6 4: USER, 5: 2.0, 6: STD (during PC input)
4: USER, 5: LIGHT 1, 6: STD (during AV input)
FLESH TONE (AV input) FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
C.M.S.-HUE (AV input)
CMHR WR -10-10 -10-10 R
CMHY Y
CMHG G
CMHC C
CMHB B
CMHM M
CRST W 1 Resets the hue.
C.M.S.-SATURATION 
(AV input)
CMSR WR -10-10 -10-10 R
CMSY Y
CMSG G
CMSC C
CMSB B
CMSM M
CRST W 2 Resets the saturation.
C.M.S.-VALUE (AV input)
CMVR WR -10-10 -10-10 R
CMVY Y
CMVG G
CMVC C
CMVB B
CMVM M
CRST W 3 Resets the brightness.
Controlling the Monitor with a PC (RS-232C)










